Cable Cutter 1000V

  • For cutting copper and aluminium cable with strong rubber or plastic sheathing
  • Ratchet-shaped clamping of the cable ensures crimp-free cutting
  • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors
  • Special cutting geometry and precision cutting for a clean cut without any burrs
  • Opening of the blade in each position possible
  • Optimum leverage, easy handling and minimum effort by ratchet action
  • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900
  • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered
  046-1000V-280
Length - mm280
Length - in11
Cable - Al + Cu multi-wired conductor single and stranded conductor - cutting capacity - Ø mm52
Cable - Al + Cu multi-wired conductor single and stranded conductor - cutting capacity - mm²420
With opening springWith opening spring
Weight - g950
Packing unit1
Barcode40 03758 04603 6
nws_i_elektrische-spannung.png

For working at or close to electrical parts please observe safety regulations for electrical works and additional national safety regulations.
Check that insulation is not damaged each time before using the tools. Do not use damaged tools anymore. Keep your safety tools clean and dry. Ensure that the workplace where you are working on live equipment is clean and tidy. Use protective clothing and safety equipment (eg. safety gloves, cover clothes and safety sleeves), especially when working in narrow areas.
Electrical work (worked carried out on electrical devices an systems) must be either conducted by a qualified electrician or supervised and checked by one.

nws_i_schutzausruestung.png

Use tools for indicated purposes only.
Before using the cutting tools please wear body protection such as safety mask, safety glasses and hand protection.
Beware of wire ends flying off!

Cable and Wire Rope Cutter
The specially designed cutters on these tools ensure the force is ideally transmitted to the point of contact and that outstanding cutting results are achieved with the lowest possible effort, which also extends the tools' service life. Some models benefit from additional lever-assisted operation and the fact that the cutters can be exchanged depending on the actual task in hand.

Sicherheitswerkzeuge.png

Better safe than sorry.
Electricians put their faith in their tools daily. Electricity is always a potential hazard. Whether they are cutting cables to size, fitting socket outlets or configuring switch cabinets, they need tools they can rely on without fail. When an electrician picks up a set of VDE tools made by NWS, he or she is handling quality tools subjected to stringent testing for practical, hands-on applications in electrical jobs. This is, after all, what professional working, health & safety are all about.

nws_i_1000V.png

Safety testing method according to IEC 60900
• Visual check and check of measurements: single check of the lettering on the basis tool as well as on the insulation.
• Check of resistance under hot and cold conditions: under normal temperatures of the surroundings (23° C) as well as under low temperatures (-25° C) on three different positions easy to hurt.
• Single voltage check: check of the electrical insulating characteristics by putting on a 10 KV voltage in a water bath for three minutes and measuring the deflecting electricity.
• Pressure check - check of puncture: storage of tools in a warming box for 2 hours at the temperature of 70° C putting on a 5 KV Voltage for three minutes and raising a power of 20 N on the insulation.
• Check of the adhesive power of the insulation: storage of tools in a warming box for 168 h at a temperature of 70° C raising a power of 500 N for three minutes on the area between the conductive part and the insulation.
• Check of fire risk: raising a flame on the insulation for 10 seconds.